-
Mini multifunctional environmentally friendly furnace
Environmental friendly! convenient! Cheap! durable! Incinerators widely used in Japan
[Solution for small amounts of garbage]/[Applicable to combustible solid waste]
Waste pallets, waste formwork, wood dust, fruit branches and leaves...etc.
Domestic garbage, paper, beverage containers, fibers, cloth strips, packaging materials, slaughtered chicken feathers, etc.
Waste plastics, waste rubber, sea (river) garbage, polymer waste made of various petrochemical raw materials, garbage that is not easily decomposed naturally... etc.
Fluffy waste, PP woven bags or packing tapes, PE plastic bags or plastic films, plastic containers, foam plastic, protective nets, fish nets, etc.
-
Small solid waste incinerator
【suitable for garbage】General garbage, solid waste, waste paper, waste wood, wood dust, plant leaves,Waste plastics, waste packaging materials, waste fibers, waste cloth strips, waste rubber, etc.
-
Mini Rotary Kiln Incinerator
The length of its furnace body is very short (the minimum model length is about two meters), and it is conical in shape. During operation, the furnace body rotates continuously and at a slow speed, so the combustion material is burnt in a turning state in the furnace, and there will be no stuffiness. After burning, the bottom slag is reduced and automatically discharged. The exhaust gas is smokeless and odorless after complete combustion at high temperature.
-
Rotary kiln incinerator
It can handle high water content, solid and liquid waste, automatic quantitative feeding, automatic ash discharge, automatic constant temperature combustion (850 ° C ~ 1000 ° C) for 24 hours continuous operation, equipment exhaust emission in line with the latest environmental regulations, waste heat during combustion Produce steam recycling, humanized, automated operation interface, centralized management and saving manpower
-
Sludge incinerator
1.Incineration treatment of sludge generated after various types of wastewater treatment.
2.Mixed combustion treatment of waste solvent, waste oil, high-concentration waste liquid, residue, etc.
-
Waste liquid incinerator
Incineration treatment of organic wastewater, high COD waste liquid, waste solvent, waste engine oil, waste cutting oil, waste salt solution, and waste fatty acid.
-
Medical waste incinerator
Incineration of infectious waste and hazardous waste generated by hospitals or clinics.
-
iron chip deoiler
Continuous operation, one deoiler can process multiple processing machinery to discharge metal scraps at the same time, the cutting oil can be recycled and reused, the deoiling rate is over 95%, and the direct knot motor drive mode is adopted, saving floor space, easy maintenance and cleaning. Easy to wash.
-
dryer_複製
It can be dried in a short time and can be dried in a short time, and the water content can be as low as 5%. Both the high and low moisture and viscosity of the object can be used. The heat exchange efficiency is very high, about 70~90%, which can save operating costs. The degree of dryness can be adjusted.
-
dryer
It can be dried in a short time and can be dried in a short time, and the water content can be as low as 5%. Both the high and low moisture and viscosity of the object can be used. The heat exchange efficiency is very high, about 70~90%, which can save operating costs. The degree of dryness can be adjusted.
-
Raw material mixer
The purpose of mixing and mixing raw materials or products. Batch feeding saves manpower. There is no dead angle inside the mixer, and the mixing effect is good. It operates in a closed mode and has a dust collector at the exhaust port, so there is no powder flying out.
-
Sludge incinerator_複製
1.Incineration treatment of sludge generated after various types of wastewater treatment.
2.Mixed combustion treatment of waste solvent, waste oil, high-concentration waste liquid, residue, etc.
others
-
Links
-
Browsing site by scanning QR Code