The length of its furnace body is very short (the minimum model length is about two meters), and it is conical in shape. During operation, the furnace body rotates continuously and at a slow speed, so the combustion material is burnt in a turning state in the furnace, and there will be no stuffiness. After burning, the bottom slag is reduced and automatically discharged. The exhaust gas is smokeless and odorless after complete combustion at high temperature.
It can handle high water content, solid and liquid waste, automatic quantitative feeding, automatic ash discharge, automatic constant temperature combustion (850 ° C ~ 1000 ° C) for 24 hours continuous operation, equipment exhaust emission in line with the latest environmental regulations, waste heat during combustion Produce steam recycling, humanized, automated operation interface, centralized management and saving manpower
1.Incineration treatment of sludge generated after various types of wastewater treatment.
2.Mixed combustion treatment of waste solvent, waste oil, high-concentration waste liquid, residue, etc.
Continuous operation, one deoiler can process multiple processing machinery to discharge metal scraps at the same time, the cutting oil can be recycled and reused, the deoiling rate is over 95%, and the direct knot motor drive mode is adopted, saving floor space, easy maintenance and cleaning. Easy to wash.
It can be dried in a short time and can be dried in a short time, and the water content can be as low as 5%. Both the high and low moisture and viscosity of the object can be used. The heat exchange efficiency is very high, about 70~90%, which can save operating costs. The degree of dryness can be adjusted.
The purpose of mixing and mixing raw materials or products. Batch feeding saves manpower. There is no dead angle inside the mixer, and the mixing effect is good. It operates in a closed mode and has a dust collector at the exhaust port, so there is no powder flying out.
Browsing site by scanning QR Code